Tips and Tricks

7 Slicer Settings Every 3D Printerer Should Know

Posted by Trizzy Orozco on

7 Slicer Settings Every 3D Printerer Should Know
Slicing is a critical step in the process that defines how your 3D objects should be printed. Learn more about slicing and the crucial slicer settings below. 

Read more →

How to Revive Wet Filaments

Posted by Trizzy Orozco on

How to Revive Wet Filaments
Before your start mourning the loss of your wet filaments, know that there are ways to revive them.

Read more →

5 Best PETG Smoothing Methods

Posted by Trizzy Orozco on

5 Best PETG Smoothing Methods
Here are the 5 best ways to smooth PETG. 

Read more →

How to Waterproof 3D Prints

Posted by Trizzy Orozco on

How to Waterproof 3D Prints

Typically, water and 3D printing don’t mix. But you’ll be surprised to know that you can waterproof your 3D prints, strengthening them against rain and moisture. No need to keep printing a new replacement for the 3D prints you’ve worn out! Here’s how you can extend the shelf-life of outdoor 3D prints by waterproofing them.  Step 1: Choosing the right materials Some 3D printing filaments are averse to water that no waterproofing can save them. Prints made of hygroscopic filaments will bloat and deform when in high-humidity situations or when it comes into contact with water. It is also important...

Read more →

3 Ways to Do Multicolour 3D Printing

Posted by Trizzy Orozco on

3 Ways to Do Multicolour 3D Printing
If you want to start seeing colour after months or years of monochromatic prints, here are 3 ways you can print multicolour 3D prints. 

Read more →

Guide to Styx-12 Nylon Filament

Posted by Trizzy Orozco on

Guide to Styx-12 Nylon Filament

Get to know FormFutura’s Styx-12 Nylon Filament better

Read more →