Dimafix - Print Bed Adhesive Pen

Form FuturaSKU: X3D-DIMAFX

Sale price$35.00

Tax included


Great and simple adhesion solution!

Good adhesion of your print to the printbed is a must in 3D printing! In order to keep your object fixed during printing and avoid warping, there is now DimaFix – Pen. DimaFix Pen is a new product based on the Dimafix – Fixative Spray (an aerosol spray adhesive for 3D printers with a heated printbed, which prevents warping of large-scale objects).

Good for ABS, ASA, Polycarbonates etc and generally high temp filaments. Not so good on nylons but heated glass bed works well for those.

Dimafix – Pen maintains the same adhesion properties as the Dimafix adhesive aerosol spray that offers a strong bond between the first layer and the build plate when the bed is heated above 60ºC.

Below 60ºC Dimafix becomes inactive, so prints can easily be removed from the build plate. DimaFix – Pen provides a strong bond between glass and plastic that is easy to break when needed. Dimafix is completely water soluble, so cleaning the build plate is an easy process.

Use for 100 Times

The Dimafix – Pen can be used more than 100 times and does not contain any gas.

Different print bed temperature results in different levels of adhesion:

    • Below 60ºC: Low adhesion, the objects can be detached from the plate.
    • 60 – 75ºC: Average adhesion, for simple geometries.
    • 75 – 95ºC: High adhesion, for complex geometries and lengthy prints.
    • Above 95ºC: Very high adhesion, for very complex geometries and very lengthy prints.

    How to Apply

    Shake the Pen

    Instructions on how to use Dimafix adhesive for 3d printing

    Apply to cool bed

    Check bed temp dimafix

    Heat the Bed over 85 C

    Cool and Remove

    Cool and remove print

    Safety Use

    Wear protective eye goggles and gloves when using and applying the product. This product can cause serious eye irritation if it gets in the eyes.

    Click here to go to the Technical data sheets page

    Customer Reviews

    Based on 16 reviews

    This stuff is absolutely awesome. Works straight away, no lifting, perfect prints every time. If you haven't used it, get some you will not be disappointed.


    Works really well and doesn’t leave any residue!

    Tristan Taylor
    Holy Cow!

    I'm totally blown away by this product, no mess no fuss and WORKS!! First time everytime!! Finally have success first print, every print with PETG, no more brims no more elephants foot trying to push the extruder into the bed and hanging out to try it with ABS. When its back in stock I'm going to buy spares!!

    Just get it

    No more glue mess this stuff just works. Easy to clean the plate with warm soapy water and easy to apply not long after. Zero failure on adhesion. Bambu Labs X1CC Cool plate. Just about to get some more :)

    Great for ASA

    This works really well on the textured glass bed of my Artillery Genius. I could never get ASA and ABS to stick to the bare bed but this stuff holds it down solid and It lasts over multiple prints, just need to reapply to the areas the last print touched. Cleans up easy with alcohol too.

    You may also like

    Recently viewed