Ultimaker S7 Bundle

No reviews

Sale price$22,145.00

Tax included


 Ultimaker S7 Bundle

Bundle and Save

Purchase UltiMaker S7 with Material Station together as a bundle to enjoy great savings!

The UltiMaker S7 Pro Bundle adds the Material Station to our newest S Series 3D printer - Ultimaker S7, transforming it into a manufacturing powerhouse. This one-of-a-kind upgrade further simplifies the 3D printing workflow with automatic switching of up to 6 spools. And constant humidity control ensures material is delivered in perfect condition for high-quality 3D prints.


The Material Station brings to the UltiMaker S7 high-quality 3D printed parts and models at maximum output. Its huge capacity and humidity-controlled material handling increases print success rate, print quality, and uptime to unlock 24/7 reliable production – while minimising human error, print job time, and operator time.

Unattended use

Designed and tested to be left unattended, the Material Station allows the UltiMaker S7 to print longer – day or night. Whether a print job requires a different loaded material, or a spool runs out, it automatically switches.

Reduced operator time

Loading material into the Material Station takes seconds – not minutes. Simply open the door, drop the spool into a bay, and guide it to either extruder. During a print, any spool that is not being used can be switched out.

Minimised print job time

The Material Station means the UltIMaker S7 can handle a wider range of print jobs. NFC material recognition informs UltiMaker Digital Factory which spools are loaded and will optimally manage your job queue – minimising downtime.

Increased quality

The Material Station on the UltiMaker S7 Pro Bundle stores material in an environment below 40% relative humidity. This keeps the filaments pristine and leads to higher print success. It's like the spool never left its packaging.


The UltiMaker S7 Pro Bundle optimises the delivery of 3D printing materials so you don't have to. Its closed, humidity-controlled chamber keeps filament in perfect condition. And while 3D printing, it reliably detects when one spool runs out of filament and automatically switches to another. This helps to avoid human error and achieve better-quality prints.

Consistent material quality by humidity control

Humidity, dust... The Material Station defeats them both. Just plug it in and its silica gel will extract moisture and automatically regenerate, keeping the fully enclosed chamber below 40% relative humidity – even in outside conditions of up to 70% humidity.

End-of-filament detection

The Material Station makes running out of filament a thing of the past. Instead, you can get the most out your materials by printing right to the end of a spool. Each filament bay in the Material Station has run-out detection and will switch spools automatically.

Reduced chance on human errors in material handling and storage

The Material Station reduces the risk of human error in material handling and storage. Ejected filament always retracts with a clean, sharp tip. And moisture-sensitive filament can be safely left in the humidity-controlled chamber.

User Effectiveness

The Material Station integrates with the UltiMaker S7, Cura, and the Digital Factory. With six front-loading NFC material bays and a simple design, it's never been easier to load, insert, and print with almost any combination of polymers and abrasive composites to unlock more 3D printing applications.

Front loading for fast changeovers

With the Material Station, say goodbye to the back of the UltiMaker S7. Load and eject material from the front – even while another spool is printing. Simply place any material in any bay, insert the filament in extruder hole 1 or 2, and press the eject button to remove it.

Load third-party polymers and composites

With abrasive-resistant prefeeders in every bay, the UltiMaker S7 Pro Bundle enables loading, printing, and storage with more third-party materials – including glass and carbon fiber composites.

Note: Ultimaker S7 Pro Bundle is estimated to be available in Australia at the end of March/ early April 2023.



Key Features



Flexible Build Plate

The flexible steel build plate allows easy, toolless removal of 3D printed parts, making it possible to reset the UltiMaker S7 in a fraction of the time it normally takes. 25 magnets and 4 pins securely hold the plate in perfect alignment, allowing for one-handed operation. A sensor prevents a print from starting without the build plate present. And the flex plate's PEI coating reduces the need for glue or build plate adhesion structures for some materials.

Integrated Air Manager

The integrated Air Manager quietly filters the exhaust from every print on the UltiMaker S7. This process has been independently tested to remove up to 95% of ultrafine particles (Tested by Fraunhofer WKI. Only including UltiMaker materials.). It also fully encloses the build chamber. This and the single glass door leave fewer gaps to increase internal temperature stability and print quality.

Inductive print head & hassle free bed levelling

3D prints succeed or fail because of their first layer. The new inductive sensor on the UltiMaker S7 detects tiny variations in the build plate’s topography with less noise, increasing accuracy. Bed tilt is calibrated in the factory and automatically maintained, removing the need for thumbscrews and the chance of user error. Together these allow you to start a print and walk away – more confident than ever in a perfect first layer.

Print head reliability

The redesigned print head features a sensor to detect potential print material flooding earlier. It also includes stronger magnets to ensure the print core door stays closed and a reversed front fan to reduce the need for cleaning and maintenance.

Material compatibility

When you can simply click and print with over 280 materials, the potential for 3D printing applications becomes limitless. These material profiles (including engineering, composite, and recycled filaments) have been tested for thousands of hours by their manufacturers and users in the field.

Print file compatibility

The UltiMaker S7 was created with compatibility in mind. This means that, if you own an UltiMaker S5, your entire digital library of UltiMaker S5 print files will work flawlessly on the Ultimaker S7 – with no reslicing needed. 

1080p camera

Checking on your print remotely via UltiMaker Digital Factory never looked better. The new 1080p camera in the UltiMaker S7 is mounted higher to give a better view of the first layers.

Quick setup and easy onboarding

From unboxing to power on, installing the UltiMaker S7 takes about 30 minutes. Just scan the QR code on the box and follow the steps of the new digital unboxing guide. This makes it easy to start 3D printing high-quality parts and models from day 1 of ownership.

Continuous improvement

The UltiMaker S7 you use next year will be better than the Ultimaker S7 you buy today. Why? Because UltiMaker's teams keep delivering regular firmware and software improvements to ensure your 3D printing experience is one of the best in the industry.

 Note: Ultimaker S7 is estimated to be available in Australia at the end of March/ early April 2023

You may also like

Recently viewed